Rotrix TSH-012 Regulator tester 230V

Purpose:

The tester is used for evaluation of the technical condition of 12/24V voltage regulators with the preset value of rotor resistance and with connection terminals «L/FR», «SIG», «RLO», «RVC», «C KOREA», «P-D», «COM» («LIN», «BSS»), «C JAPAN», by the following criteria:

  • continuity of the control lamp circuit;
  • performance of the channel for output voltage setup;
  • performance of the feedback channel;
  • stabilizing voltage and its correspondence to the setpoint;
  • engine speed rate for activation of the voltage regulator;
  • voltage regulator-maintained load.


Categorieën: Test equipment

Merken: Rotrix

Sub categorieën: Testers and tools

Specifications

add remove

For COM voltage regulators:

  • voltage regulator ID;
  • operability of the voltage regulator diagnostic system;
  • type of data exchange protocol;
  • speed of data exchange.

The tester also helps to select the analog voltage regulator for any particular alternator.


Advantages:

  • integrated health assessment of a voltage regulator;
  • user-friendly interface and touch screen ensure easy operation of the tester;
  • color marking of the wires enables proper connection of the tester to a voltage regulator;
  • free tester firmware update;
  • in-built protection systems prevent damage to the tester in case of improper connection of the tested voltage regulator.
TECHNICAL CHARACTERISTICS

Dimensions (L×W×H), mm

265×260×92

Weight, kg

4,1

Supply voltage, V

230 or 120

Supply frequency, Hz

50 or 60

Supply type

single phase

Maximum power consumption, W

500

Testing of voltage regulators

Voltage of tested regulators, V

12, 24

Resistance of simulated rotor winding, Ohm

12V – from 1.8 to 22

24V – from 4,1 to 22

Frequency of stator windings (simulation of engine rotation), RPM

from 0 to 6000

Load simulation, %

from 0 to 100

Tested parameters of voltage regulator

- stabilizing voltage;

- current through rotor winding;

- control lamp (D+).

For COM voltage regulators:

- ID;

- regulator type;

- data exchange speed;

- protocol type;

- errors.

Types of tested voltage regulators

12V

«L/FR», «SIG», «RLO», «RVC», «C KOREA», «P-D», «COM» («LIN», «BSS»), «C JAPAN»

24V

«L/FR», «COM» («LIN», «BSS»)

Control of generation voltage in externally adjusted voltage regulators

yes

Short circuit protection

yes

Short circuit sound alert

yes

Operating temperature, ℃

from +10 to +40

Storage temperature, ℃

from 0 to +50

Humidity, relative

from 0 to 75%

IP rating

IP20